Job Vacancies at Egbin Power Plc – 16 November 2026

Egbin Power plc Jobs and Recruitment
Egbin Power Plc
View and Apply for More: 
Share post

Egbin Power Plc job vacancies in Lagos: Team Lead, Turbine Controls, Plant Operator and Planning Engineer jobs. Explore engineering jobs and power sector vacancies in Nigeria and apply before 31 December 2026.

Company: Egbin Power Plc
Location: Lagos, Nigeria
Employment Type: Full-time

About Egbin Power Plc

Egbin Power Plc is one of the largest additions to Nigeria’s electricity industry and is widely recognised as the biggest single electricity generating power station in Sub-Saharan Africa. Located in Lagos, the power plant was established to meet the growing demand for electricity in Lagos and its surrounding areas.

Following Nigeria’s power sector privatisation exercise, Sahara Power Group, through its power division and affiliated companies, acquired the 1,320 MW installed capacity Egbin Power Plant. The company is working towards expanding its electricity generation capacity to at least 5,000 MW over the next five years.

Egbin Power Plc is inviting applications from suitably qualified and experienced candidates to fill the following positions:

1. Team Lead, Turbine Controls

Job Identification: 636

Job Summary

The Team Lead, Turbine Controls will oversee preventive, corrective and breakdown maintenance of turbine control systems, ensuring equipment reliability, operational efficiency and compliance with established safety standards.

Key Duties and Responsibilities

  • Ensure adherence to breakdown and corrective maintenance schedules.
  • Maintain working knowledge of Emerson Ovation control systems and Bentley Nevada vibration monitoring systems.
  • Ensure all preventive maintenance activities are properly executed and documented.
  • Develop and improve breakdown and corrective maintenance practices.
  • Ensure all breakdown and corrective maintenance activities are completed and appropriately documented.
  • Review breakdown and corrective maintenance processes weekly.
  • Monitor the timely closure of maintenance tasks (TMs) in the Computerised Maintenance Management System (CMMS).
  • Liaise with the Lead Engineer, Turbine Field Instrumentation, to reassess equipment breakdowns and determine their inclusion in preventive maintenance schedules.
  • Address human resources and personnel-related issues, escalating unresolved matters where necessary.
  • Ensure monthly and special reports are prepared and properly documented.
  • Periodically assess staff training needs to improve performance and productivity.
  • Ensure the availability of materials, spare parts and tools required for maintenance activities.
  • Supervise control systems, focusing on operational efficiency and environmental sustainability.
  • Ensure strict compliance with Health, Safety and Environment (HSE) guidelines during all maintenance activities.
  • Develop plant patrol and monitoring checklists and review them periodically.
  • Support spare parts planning, budget preparation, procurement and inspection activities.
  • Ensure documentation complies with Integrated Management System (IMS) standards.
  • Implement strategies to improve equipment performance and reliability.
  • Ensure risk registers covering breakdown and corrective maintenance activities and the section are maintained and periodically reviewed.
  • Perform the covering role of the Unit Head, Turbine Systems, in their absence.
  • Carry out other duties as assigned by the Unit Head, Turbine Systems, or Head of Department.

Education and Work Experience

  • A Bachelor’s Degree or its equivalent in Computer, Electrical, Mechanical, Chemical or Systems Engineering.
  • A postgraduate qualification or relevant professional certification.
  • 5–10 years of relevant work experience, including at least three years in a supervisory role.
  • Direct exposure to instrumentation and control (I&C) systems and power plant maintenance processes.

Skills and Competencies

  • Good technical knowledge and understanding of the operations and history of instrumentation and control systems.
  • Strong technical troubleshooting skills.
  • Good knowledge of Computerised Maintenance Management Systems (CMMS) or equivalent platforms.
  • Sound knowledge of the relevant engineering discipline.

2. Plant Operator

Job Identification: 690

Job Summary

The Plant Operator will be responsible for ensuring the safe, reliable and efficient operation of assigned generating units through equipment monitoring, performance assessment, troubleshooting and operational support.

The successful candidate will monitor plant equipment, identify operational abnormalities, support maintenance activities and ensure compliance with established operating procedures and safety standards to optimise plant availability, reliability and efficiency.

Key Duties and Responsibilities

  • Conduct detailed technical inspections and condition assessments of assigned boiler, turbine, condenser, feedwater, cooling water and auxiliary systems to ensure optimal equipment performance and reliability.
  • Analyse equipment operating conditions, including leaks, abnormal noise, excessive vibration, temperature variations and pressure fluctuations, and recommend appropriate corrective actions.
  • Identify, investigate and evaluate operational abnormalities, equipment defects and potential safety hazards, ensuring timely resolution and escalation.
  • Operate and monitor field equipment, including valves, pumps and drain and vent systems, in accordance with approved operating procedures and authorisation requirements.
  • Monitor the performance and operating parameters of auxiliary systems, including fuel supply, cooling water and lubrication systems, to ensure operational efficiency and reliability.
  • Coordinate and execute field activities associated with plant start-up, shutdown and equipment changeover in collaboration with the Control Room team.
  • Ensure compliance with plant operating procedures, engineering standards, risk assessments and established safety requirements.
  • Participate in safety inspections, toolbox talks, emergency response exercises and other HSE initiatives.
  • Ensure assigned plant areas and equipment meet established housekeeping, operational readiness and safety standards.
  • Maintain accurate technical records of equipment operating conditions, inspections, abnormalities, interventions and operational activities.
  • Communicate equipment status, operational deviations, technical observations and corrective actions to the Control Room and relevant technical teams.
  • Prepare comprehensive technical reports and shift handover documentation, highlighting equipment conditions, outstanding defects and operational concerns.
  • Coordinate with maintenance teams on equipment preparation, isolation requirements and technical support for preventive and corrective maintenance activities.
  • Assess equipment performance and identify early warning signs of deterioration or potential failure, recommending appropriate preventive interventions.
  • Participate in technical troubleshooting, equipment fault diagnosis and root cause failure investigations.
  • Provide engineering support during plant trips, equipment breakdowns and operational emergencies to facilitate the safe and timely restoration of plant operations.
  • Coordinate field-level emergency response activities, including equipment shutdown and restoration, in collaboration with the Control Room and relevant technical teams.
  • Participate in fire drills, emergency preparedness exercises and incident response activities to strengthen plant operational resilience.

Education and Work Experience

  • A Bachelor’s Degree in Engineering or Higher National Diploma (HND) in Mechanical, Electrical or Power Plant Engineering.
  • 0–2 or more years of relevant experience in a power generation plant, refinery or heavy industrial process plant.
  • Previous experience in steam turbine operations or thermal power plants will be an added advantage.

Technical Skills and Knowledge

  • Basic knowledge of power plant processes, including steam cycles, boiler operations and cooling systems.
  • Ability to read and interpret pressure, temperature and flow gauges, as well as Piping and Instrumentation Diagrams (P&IDs).
  • Familiarity with safety regulations, permit-to-work systems and emergency shutdown procedures.
  • Basic troubleshooting skills relating to pumps, valves, pipes and auxiliary equipment.

Behavioural and Soft Skills

  • Strong attention to detail and observational skills.
  • Effective communication and ability to work in a team-oriented environment.
  • Discipline and reliability in executing operational tasks.
  • Ability to work under pressure and respond appropriately to emergencies.
  • Strong analytical and critical thinking skills.
  • Open-mindedness and willingness to share knowledge.
  • Good teamwork and collaboration skills.

3. Planning Engineer

Job Identification: 687

Job Summary

The Planning Engineer will be responsible for planning and coordinating plant maintenance activities, monitoring equipment performance to ensure operational reliability, and maintaining accurate maintenance reports and documentation in line with established procedures.

Key Duties and Responsibilities

  • Maintain accurate inventory records and documentation of planned shutdown spare parts, tools and materials.
  • Coordinate and execute shutdown planning and preparation activities, including preparing purchase requests and participating in technical evaluations.
  • Facilitate daily planning meetings with maintenance departments to ensure effective coordination of jobs, resources and material requirements.
  • Monitor daily maintenance job progress and prepare timely status reports.
  • Review and maintain plant equipment maintenance records to support maintenance planning and scheduling activities.
  • Ensure the availability of required materials, tools and resources for planned shutdown activities.
  • Perform other duties as assigned by the Team Lead, Planned Shutdown.

Education and Work Experience

  • A Bachelor’s Degree or its equivalent in Engineering.
  • A minimum of two years’ relevant work experience.

Skills and Competencies

  • Strong attention to detail.
  • Critical thinking and analytical skills.
  • Leadership and problem-solving abilities.
  • Good time management and organisational skills.
  • Effective communication and people management skills.
  • Proficiency in Microsoft Office Suite and MS Project.
  • Knowledge of operations, Maintenance Management Systems and modern maintenance management practices.
  • Understanding of environmental and safety requirements and statutory guidelines.
  • Ability to manage relationships with suppliers of materials and services.
  • Strong planning and project management capabilities.
  • Knowledge of material and resource requirements for power plant operations.

How to Apply

Interested and qualified candidates should apply online for their preferred positions through the respective Egbin Power Plc recruitment links below:

  1. Team Lead, Turbine Controls: Click here to apply
  2. Plant Operator: Click here to apply
  3. Planning Engineer: Click here to apply

Application Closing Date: 31st December, 2026, at 12:00 AM.

Share post

Join Our CareerNews Telegram Channel

Join Now