View and Apply for More:
Share post
Snr Pipeline Engineer
State Rivers City PORT HARCOURT
Candidate Profile
- Minimum Qualification: University Degree in Civil or Mechanical Engineering with at least 8 years post qualification with at least 5 years as a pipeline engineer
- Proficiency in MS-Office suites.
Activities
- Perform preliminary, basic, and detailed pipeline engineering studies and produce associated deliverables (MTOs, calculations, datasheets, drawings, etc.
- Review designs produced by COMPANY or contractors to ensure compliance with COMPANY referential, applicable laws and project specifications.
- Prepare and contribute to equipment specifications for procurement purposes.
- Review of contractors’ pipeline deliverables to ensure technical quality.
- Read and interpret facility engineering drawings and make necessary modifications or recommendations.
- Develop procedures and all design supports / specifications required to always maintain readiness of the EPRS (Emergency Pipeline Repair System)
- Supports other ECP departments. Field Operations and other entities on pipeline related issues,
- Liaise with suppliers and manufacturers of equipment and materials to ensure technical specifications are understood and met.
- Support tendering and technical evaluations related to pipeline engineering contractors
- Prepare and cross-check relevant procedures, international standards and COMPANY technical specifications for application into design activities.
- Assist with the selection of laying spread/methods and perform/review installation design analysis for new pipeline system Contributes to Safety Reviews Hazard and Operability Studies (HAZOP), Hazard Identification studies (HAZID)
- Participate in Job Risk Assessments (JRA), Constructability reviews and other relevant reviews
Context & Environment
- Work location: Based in Port Harcourt or Lagos with regular site visits. Major client is Field Operations (onshore, offshore & deepwater).
- Constraints: Inaccuracies and delays in design could result in severe safety issue and production deferment. Client statement of requirements sometimes not detailed and As- built documentations incomplete. Often tight delivery milestones driven by operational needs.
- Favourable Factors: TotalEnergies Nigeria assets represent technically challenging projects. Numerous contacts and supports within ECP, other entities and HQ
Additional Information
- Provides Pipeline Engineering discipline knowledge and experience to the Engineering team in supports of Assets. (Onshore, Offshore & Deepwater)
- Demonstrate full compliance with TotalEnergies code of conduct
- Timely delivery of assigned engineering design scope
- Strict compliance with all Company HSE requirements
Subsea Inspection Engineer
Lagos
Candidate Profile
- Education: – BEng / BSc in Engineering, Marine, Naval Architecture or equivalent,
- Professional experience: – 5 to 10-year experience in subsea inspection, pipeline design, pipeline construction or marine classification, including Supervisory experience.
- Job holder shall also be knowledgeable about international design and construction codes for pipelines as well as subsea inspection risks, findings, mitigations and repair
- English: – fluent
- Subsea inspection in oil & gas is an added advantage
Activities
- Responsible for the preparation of annual Subsea Inspection scope of work in accordance with applicable company rules and general specifications.
- Ensure the implementation and progress of the Annual Subsea Inspection Program
- Prepare inspection report with details of all anomalies, integrity threats and downgraded situations clearly highlighted
- Manage the follow up and final execution of actions triggered by the inspections
- Ensure that all risks associated to corrosion and structural behaviour of the subsea assets are identified, communicated and that preventative or remedial solutions are put in place.
- Responsible for the follow up of integrity of the risers, pipelines, structures, mooring systems and hulls of the floating units
- Review Subsea Inspection Reports. Propose corrective actions and, after validation, issue Recommendations using the dedicated Data Base (UNISUP) and ensure they are completed with the adequate level of priority
- In addition, the job holder will be responsible for inspecting the items which are part of the Emergency Pipeline Repair System (EPRS) and will ensure adequacy of EPRS with major threats identified by Asset Integrity.
- Responsible for contractor’s mobilization and site execution of Intelligent-Pigging Campaigns
- Maintain the implementation of the Inspection results in UNISUP, PRODOM, and other dedicated data base priority
Context & Environment
- 2 FPSO Systems (Floating Production Storage Offloading) with 2 BUOYs: AKPO & EGINA
- Umbilicals, Flowlines and Risers. Subsea Production Systems (AKPO & EGINS)
Additional Information
- Control implementation of the Inspection Plans and Procedures
- Review and assess Inspection Reports and Scopes of work,
- Make Technical Proposals regarding Modifications and repairs
- Contribute to Organization, Working System, Tools, Personnel & Resource requirements
- 2 FPSO and Offloading buoys (AKPO 2009 and EGINA 2018)
- Production Level: during plateau period = 110kbopd and 17Mmscm/d (AKPO), 180kbopd and 3.5Mmscm/d (EGINA)
- Technology Involved in the Job: Diving; Subsea; Deep-Water Operation; Intelligent Pigging; Non-Destructive Examination; Metallurgy; Pipeline repair system
Snr Electrical Engineer
Candidate Profile
- Minimum Qualification: B.Sc./B.Eng.(Electrical Engineering) with 5-10 years’ experience in an Engineering Organization (oil and gas related) in a similar design position. NSE/COREN Membership required
- Use of Power tools, MS word, MS excel is required. Working knowledge of IEC Standards and most common international standards. Knowledge of ETAP, Autocad and PDMS is an advantage.
Activities
- Develop design of integrated electrical systems (Electrical design basis, Transformers, short circuit current, load sharing, load shedding, single line diagrams, cable sizing…)
- Carries out preliminary, basic and detailed facilities engineering studies / design in-house.
- Ensures that the facilities Engineering Contractors submit all deliverables on time and checks/reviews them regularly to achieve Company quality expectations.
- Prepares single line diagrams, electrical design calculations such as cable sizing calculations, lighting calculations etc., specifications for electrical materials,
- Prepares layout drawings such as cable routings, lighting layouts, earthing layout etc.
- Prepares requisitions for Electrical materials procurement and technical bids evaluation.
- Reads and interprets engineering drawings, specs and make necessary modifications or recommendations.
- Interfaces with Procurement Dept., Project & Construction department & Field Ops (Electrical) for engineering related issues.
- Draw up and cross-check relevant procedures, international standards and TOTALENERGIES General Specifications.
- Prepares CFT for Electrical engineering activities and relevant technical evaluation.
- Follows-up Purchase Orders to ensure timely approval, conformity of design & participates in reviews and FAT of electrical equipment such as switchboards, distribution panels, transformers, electric motors etc. with Vendors
- Checks, comments diligently and approves Electrical engineering deliverables received from Contractors or Third Parties and makes sure that comments are incorporated in revised documentation.
- Checks that the design is developed in line with the Pre-Project studies and the Statement of Requirements.
- Coordinates with FOPs in both DW & JV Assets for integration of new electrical systems into the existing facilities.
- Provides electrical engineering discipline support on Engineering and Construction activities.
- Reviews the deliverables of Electrical engineers and Designers in the team for technical quality before final review by the Head of Section.
- Provides support to the Head of Section in managing the team, whenever there is a spike in the workload, by attending meetings, preparing reports, and undertaking other administrative duties on his behalf.
- Acts as DOA and takes responsibility for the activities of the team whenever the Head of Section is unavailable
Context & Environment
- Context: Engineering studies for production facilities modifications or medium size brown field projects.
- Work location based in Lagos. Sites: Production sites Onshore, Offshore and Deepwater.
- Major clients are DW & JV FOP’s Dept, HSE, Development and Planning.
- Constraints:
– Client Statement of requirement (SOR) not detailed and as built documentation not complete.
– 100% Nigerian local content constraints to be applied in a local Engineering
– Tight delivery milestones which is a function of Operational objectives
Share post